Schweitzer Engineering Laboratories SEL-2020 - Page 134

4-52 “Job Done” Examples - (Example 6) Date Code 20010518
SEL-2020 Instruction Manual
2. Change the printer settings made in Example 5 so event report records are no longer cleared
after printing. The records will remain in the archive data region until they are sent to the
modem every weekday morning.
You should see the following screen:
*>>SET A 9 <ENTER>
SET A 9 <ENTER>SET A 9 <ENTER>
SET A 9 <ENTER>
Automatic message settings for Port 9
Port Startup String
STARTUP =""
? <E
<E<E
<ENTER>
NTER>NTER>
NTER>
Auto-message Settings
How many auto-message sequences (0-12) MSG_CNT = 2 ? <ENTER>
<ENTER><ENTER>
<ENTER>
Print all buffered unsolicited messages (Y/N)PRINT_ALL= Y ? <ENTER>
<ENTER><ENTER>
<ENTER>
Clear unsolicited message buffer after print (Y/N)CLEAR_BUF= Y ? <ENTER>
<ENTER><ENTER>
<ENTER>
Item 2 trigger D2
ISSUE2 = !1:ARCH3 * !2:ARCH3 * !3:ARCH3 * !4:ARCH3 * !5:ARCH3 *
!6:ARCH3 * !7:ARCH3
? <ENTER>
<ENTER><ENTER>
<ENTER>
Item 2 message
MESG2 = "\F01:A3;C/\F02:A3;C/\F03:A3;C/\F04:A3;C/\F05:A3;C/\F06:A3;C/\F07:A3;C/"
? \
\\
\F01:A3/
F01:A3/F01:A3/
F01:A3/\
\\
\F02:A3/
F02:A3/F02:A3/
F02:A3/\
\\
\F03:A3/
F03:A3/F03:A3/
F03:A3/\
\\
\F04:A3/
F04:A3/F04:A3/
F04:A3/\
\\
\F05:A3/
F05:A3/F05:A3/
F05:A3/\
\\
\F
FF
F06:A3/
06:A3/06:A3/
06:A3/\
\\
\F07:A3/ <ENTER>
F07:A3/ <ENTER>F07:A3/ <ENTER>
F07:A3/ <ENTER>
Size of user-defined data space in registers USER = 0 ? <ENTER>
<ENTER><ENTER>
<ENTER>
STARTUP =""
MSG_CNT = 2
PRINT_ALL= Y
CLEAR_BUF= Y
ISSUE2 = !1:ARCH3 * !2:ARCH3 * !3:ARCH3 * !4:ARCH3 * !5:ARCH3 *
!6:ARCH3 * !7:ARCH3
MESG2 = "\F01:A3/\F02:A3/\F03:A3/\F04:A3/\F05:A3/\F06:A3/\F07:A3/"
USER = 0
Save changes (Y/N) ? Y <ENTER>
<ENTER><ENTER>
<ENTER>
Port 9 Settings Changed
*>>
Note:  Change the \F:.../ string so it no longer clears the record queue when the records are sent
to the printer.
OPERATION
On each day (Monday through Friday) at 7:00 a.m., the SEL-2020 dials the number specified
with the \I string in the MESG1 setting, transfers event reports stored in the database on Ports 1
through 7, and then deletes the reports from the database.
After initiating the dial string, the SEL-2020 internal modem waits 60 seconds for a connection.
If a connection is not established in 60 seconds, the SEL-2020 hangs up the modem and tries the
call again in two minutes.
