To Next Page

To Previous Page

Service Manual for WP6 Diesel Engine

Loctite 277

Used for the seal

between core and

hole

Other bowl type plugs

Loctite 270

Used to seal top end

face of cylinder

cover

Pushrod bush

Cylinder cover

Loctite 518

(Renewed

product of

510)

Apply on shining

metallic surface for

sealing

Fitting surface between cylinder block and

crankcase, fitting surface between engine block

and engine front cover

Rear end face and flywheel connecting board

Fitting surface between engine oil filter seat and

crankcase

Water pump rear cover－engine block front end

face

Flywheel connecting board－flywheel housing

Fitting surface between cylinder block and

engine oil cooler cap

Fitting surface between cylinder block and

engine oil filling port cover plate

22 Daily Maintenance

221 Check Coolant Level and Temperature

Check the coolant level through the glass window, Open the filler cap to add coolant if it is

insufficient.

NOTICE: Press down exhaust button in advance before open the filler cap to avoid injury

caused by hot coolant.

Fig. 2-3 Check coolant level and temperature

SDLG WP6 User Manual

Questions and Answers: