Service Manual for WP6 Diesel Engine
51
Key point 2:
Assembling:
(1) Apply sealant on fitting surface of engine block and partially apply sealant on oil sump, place
sealing gasket on the fitting surface.
(2) Lift and place oil sump, be careful and avoid crashing the fitting surface.
(3) Place bolts and gaskets, and tighten the bolts with pneumatic impact wrench to 20~355Nm.
3354 Steps to Assemble Oil Sump
Assembling steps are contrary to disassembling ones.
336 Disassembly, Inspection, Maintenance and Assembly of Piston Nozzle
3361 Exploded View of Piston Nozzle
To Next Page
Loading...