Electric Power Generation Division
Declaration of CE compliance and incorporation
This Declaration applies to the generators designed to be incorporated into machines complying with the
Machinery Directive Nr 2006/42/CE dated 17 May 2006.
MOTEURS LEROY-SOMER MLS HOLICE STLO.SRO MOTEURS LEROY-SOMER
Boulevard Marcellin Leroy SLADKOVSKEHO 43 1, rue de la Burelle
16015 ANGOULEME 772 04 OLOMOUC Boite Postale 1517
France Czech Republic 45800 St Jean de Braye
France
Declares hereby that the electric generators of the types LSA 36 – 37– 40 – 42.2 – 43.2 – 44.2 – 46.2 – 47.2 –
49.1 – 50.2 – 51.2, as well as their derivatives, manufactured by Leroy Somer or on Leroy Somer's behalf,
comply with the following International Standards and Directive :
- EN and IEC 60034 -1 and 60034 -5
- ISO 8528 – 3 “ Reciprocating internal combustion engine driven alternating current generating sets.
Part 3. Alternating current generators for generating sets ”
- Low Voltage Directive Nr 2006/95/CE dated 12 December 2006.
Furthermore, these generators, designed in compliance with the Machine Directive Nr 2006/42, are therefore
able to be incorporated into Electrical Gen-Sets complying with the following International Directives :
- Machinery Directive Nr 2006/42/CE dated 17 May 2006
- EMC Directive Nr 2004/108/CE dated 15 December 2004, as intrinsic levels of emissions and
immunity are concerned
WARNING :
The here above mentioned generators should not be commissioned until the corresponding Gen-Sets have
been declared in compliance with the Directives Nr 2006/42/CE et 2004/108/CE, as well as with the other
relevant Directives.
Leroy Somer
undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on
the generator.
Technical Managers
P Betge – J.Begué
4152 en – 2010.11 / d
To Next Page
Loading...
Need help?
General
