6.2.1.6. Display of messages in zone 4
The display (zone 4), among other things, displays messages relating to the operation of the generating set. The messages are as
follows:
Initialisation of TELYS
Screen no. Screen Data displayed
G 1
Initialisation of TELYS when the power is switched on
and/or when loading a configuration
G 2
SERIAL No.: 08030010000
SOFTWARE: 6.1.0
NOMINAL VOLTAGE: 400V
FREQUENCY: 50Hz
NOMINAL KW: 320kW
EARTH SYSTEM: TNS
Generating set serial no.
Software version of TELYS
Alternator Nominal Voltage
Alternator Nominal Frequency
Nominal Active Output
Neutral Point
Bar graph indicating the display delay of the screen
To Next Page
Loading...
