2.3. Fuel and consumables
All specifications (product features) are given in the motor and alternator maintenance manuals attached to this manual.
In addition, we recommend the consumables to be used in the "specifications" section.
2.3.1 Specifications
2.3.1.1. Oil grades
Engine Oil
Make Type Make Type
John Deere All
John Deere John Deere PLUS-50
GenPARTS GENLUB TDX 15W40
MITSUBISHI All GenPARTS GENLUB TDX 15W40
Volvo All GenPARTS GENLUB TDX 15W40
GENLUB TDX 15W-40
Top-of-the-range lubricant recommended for diesel engines: for generating sets used under severe conditions.
USES:
Particularly suited to more modern engines with or without turbochargers, intercoolers, or sophisticated injection systems
(e.g. HEUI, injector-pumps).
All types of use: can cope with the most demanding applications.
Depolluted engines: complies with EURO 2 and EURO 3 technology and can be used with all types of diesel fuel,
especially ecological diesel with low sulphur content.
PERFORMANCE:
ACEA E3
API CH-4
Meets level E3 of the specifications defined by European manufacturers in the ACEA standards 98 edition.
ADVANTAGES:
Less frequent oil services: this product has been put to the test during thousands of hours of use on worksites under
varying conditions, demonstrating its high quality.
Conformity with new environmental legislation: adherence to new anti-pollution standards required for new EURO 2
and EURO 3 engines.
SPECIFICATIONS:
SAE Grade 15W-40
Density at 15°C 0.883
Cinematic viscosity at 40 °C
Cinematic viscosity at 100 °C
105
14.1
mm2/s (cSt)
mm2/s (cSt)
Viscosity index 140
Dynamic viscosity at -15 °C 3000 mPa.s(cP)
Pour point - 30 °C
Flash point 220 °C
Sulphated ash content 1.4 % weight
(Values given as examples only)
To Next Page
Loading...
Need help?
General
