Need help?Do you have a question about the Seatex DPS 200 and is the answer not in the manual?
General| Brand | Seatex |
|---|---|
| Model | DPS 200 |
| Category | Marine GPS System |
| Language | English |
Provides an overview of the Installation Manual, including references and abbreviations.
Lists the standards and documentation referenced in the manual.
Defines common abbreviations and acronyms used throughout the document.
Details the physical size and weight of the DPS 200 unit, antenna, and cabinet.
Specifies the voltage and power consumption requirements for the system.
Outlines operating temperature, humidity, and enclosure protection ratings.
Defines the minimum safe distance from magnetic compasses.
Lists the standard and optional components included in the DPS 200 system delivery.
Covers safety guidelines, personnel qualifications, and required tools for installation.
Provides recommendations for placing the DPS 200 unit and GPS/GLONASS antenna.
Details the procedure for securely mounting the DPS 200 equipment cabinet.
Step-by-step guide for installing coax connectors onto the antenna cables.
Instructions for mounting GPS/GLONASS and IALA beacon antennas and cables.
Describes the unit's connectors, serial lines, and PPS signal interface.
Outlines the sequence for connecting all system components and power.
Covers initial power-on and configuration of COM ports for communication.
Explains how to modify system parameters via the setup file for optimal operation.
Details the configuration and management of reference station data files.
Describes the final steps for commissioning the installed DPS 200 system.
Provides physical dimension outlines for the DPS 6U and 12U cabinets.
Illustrates the system's block diagram and lists associated cables.
Details the mounting requirements for the GPS/GLONASS antenna.
Configures DP interface parameters like baud rate, parity, and NMEA output.
Sets parameters for satellite elevation mask, HDOP, PDOP, and height aiding.
Details the format and fields of the reference station coordinate definition file.
Provides physical, environmental, and radio specifications for the DGPS 465 unit.
Explains how to configure the DGPS 465 unit's UHF channel and lists frequencies.
Details the physical size, mounting hole dimensions, and connector layout.
Covers display installation, power requirements, and NMEA telegram input.
To Next Page
