EasyManua.ls Logo

Seatex DPS 200 - Environmental specifications

Seatex DPS 200
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Seatex DPS 200 Installation Manual, rev. 4 Specification
4
2.3 Environmental specification
DPS 200 Unit
Enclosure material:.....................................................................................................Aluminium
Enclosure protection:...........................................................................................................IP-53
Operating temperature range: ..................................................................................+5 to +40ºC
1
Recommended operating temperature range:..........................................................+20 to +25ºC
Operating humidity:...........................................................................Max. 95% non-condensing
Storage temperature range:...................................................................................... -20 to +60ºC
Storage humidity:...................................................................................................Less than 55%
Vibration testing according to: .....................................................................................EN 60945
GPS/GLONASS Antenna
Enclosure material:..........................................................................................................Polymer
Operating temperature range: .................................................................................. -40 to +65ºC
Operating humidity:................................................................................................... Max. 100%
2.4 Radio frequencies
GPS/GLONASS receiver GG24: ...................................... 1565.42 MHz
-1616 MHz (Rx only)
IALA Beacon receiver: ..................................................................280 kHz- 320 kHz (Rx only)
2.5 Cable specification
Coax Cable Specifications (For details see Appendix B)
Type:...................................................................................................1/2" Cellflex superflexible
Attenuation: ........................................................................................14 dB/100 m (at 1.5 GHz)
Maximum length: ...............................................................................................................100 m
Diameter: ........................................................................................................................13.7 mm
Minimum bend radius:...................................................................................32 mm, single bend
Flame retardation:..............................................IEC 60754-1, -2, IEC 60332-1, -3.C, UL 1581,
....................................................................................................... UL 1666, NEC type CATVR
1
Operating temperature up to +55ºC for 10 hours.
FSP ref.: A11213500XRBRA0

Table of Contents

Related product manuals