SEAWARD PRIMETEST SERIES USER MANUAL
TESTED. TRUSTED… WORLD WIDE Page 12 of 77
5.2 Before Using Your PrimeTest for the First Time
Before using your PrimeTest for the first time, please ensure that you fully charge the instrument using the
black power lead plugged into the mains inlet.
Note: Please ensure the batteries are fully charged before first use, they are not shipped fully charged
5.3 Powering ON / OFF an PrimeTest Series
Switch on the PrimeTest by pressing and holding, the green ON/START key. After 2-3 seconds the instrument
will beep and the display will show a boot up screen.
This is the Power ON button.
This is the Power OFF button
To Next Page
Loading...
Need help?
General
