SEAWARD PRIMETEST SERIES USER MANUAL
TESTED. TRUSTED… WORLD WIDE Page 55 of 77
Asset ID This is unique identifier for the Equipment Under Test (EUT). This can be entered using
the keypad, a barcode scanner (see section 7.4 on Bluetooth Setup), QR code scanner
(not available on the PrimeTest Pro) or set to automatically increment (see section 7.6
PAT Settings).
Test Sequence This is the name of the pre-defined (or User Defined) Test Sequence which will be
performed on the equipment. Select the appropriate Test Sequence from the
dropdown menu using the keyboard arrow keys or by pressing the appropriate letter.
Site This is the Site where the equipment is located. You can choose a Site from the
dropdown using the keyboard arrow keys, enter a new one or use a barcode scanner.
Location This is the Location within the site where the equipment is. You can choose a Location
from the dropdown using the keyboard arrow keys, enter a new one or use a barcode
scanner.
Retest Period This is the period, in months or weeks, in which the equipment should be re-tested
and inspected.
11.1 Auto Mode – Camera Function (PrimeTest Elite+ only)
Camera Function (PrimeTest Elite+ only). You can use the Camera function (F2) to attach photos to
the asset record.
Press this button (F1) to take the picture.
This button (F2) will enable and disable the flash light.
To Next Page
Loading...
Need help?
General
