Sega TARGET BRAVO OPERATION GHOST - Page 123

GAME BOARD
113
16
ManualRecovery
Use the following procedure to return the RINGWIDE system software to a previous state.
1
Press the TEST and SERVICE Buttons simultaneously with the RINGWIDE power o.
Hold the buttons down and turn on the power.
2
After RINGWIDE starts up and the following message is displayed, release the buttons.
The system software will recover automatically. The Advertising screen will be displayed once everything nishes.
Until it is displayed, do not interfere with the cabinet’s operations.
(If you are uninstalling a game, the Install Wait screen will be displayed.)
SYSTEM UPDATE
STEP1
DO NOT TURN OFF THE POWER