ENGINE TOP END
3-5-13
A
H
B
C
Ignition Coil / Spark Plug
Spark Plug
Removal
◆
Disconnect the Ignition Coil Lead.
◆
Remove:
Bolt M6
×20
【
A
】
Ignition Coil
【
B
】
Spark Plug
【
C
】
CAUTION
The Spark Plug should never be allowed to fall on a
hard surface. Such a shock to the part can damage it.
NOTE
Remove the spark plug. Stuff spark plug holes with
shop towels to prevent anything from falling into the
combustion chamber.
Spark Plug Installation
◆
Apply anti-seize compound to spark plug threads.
◆
Install
Spark Plug
Ignition Coil
Bolt M6
×20
◆
Tighten
Torque
Bolt M6×20
10 N•m (1.0kgf•m, 87in•lb)
Spark Plug
11 N•m (1.1kgf•m, 97in•lb)
Spark Plug Inspection :
Spark Plug
electrode gap :
【
H
】
=0.6 ~ 0.8
To Next Page
Loading...
