Segway SNARLER SGW570A6 2021 - Front;Rear Axle Gear Oil; Oil Fi Lter Change

2 - 21
MAINTENANCE
MAINTENANCE
Oil fi lter change
This procedure requires mechanical skill and professional
tools such as a torque wrench as well as a means for
disposing of the drained fl uid. If you do not have the skills
or the tools, see your dealer.
Check the fl uid recommendation table for capacities and
plug torques. Always change the oil filter at the same
time when changing the oil.
【
A
】
Screw
【
B
】
Oil fi lter inspection cover
【
C
】
Oil fi lter
◆
Remove the fixing screws of the filter inspection
cover and open the fi lter inspection cover
，
you can
see the black cover, the oil fi lter is located here, put
the towel under the oil fi lter
◆
Change a new O shape ring onto a new oil filter,
inspect and make sure the O shape ring is in good
condition.
◆
Remove the oil filter to be replaced by the tool
counterclockwise.
Rotate clockwise to install the new filter until the filter
gasket touches the sealing surface. Tighten the can.
Front/Rear Axle Gear Oil
【
A
】
Filling plug
【
B
】
O-ring
【
C
】
Drain plug
◆
Put the vehicle on the fl at level surface
◆
Place an oil drain pan under the
drain plug
【C】；
◆
Remove the drain plug
【C】
and O-ring
【B】
；
Torque to specifi cation
：
Drain Plug: 16~20N.m
◆
After the oil has completely drained, reinstall the
drain plug
【C】
and a new O-ring
【B】
.
◆
The oil discharged is harmful to the environment.
Properly dispose of the oil properly
；
◆
Remove the
Filling plug
【
A
】
and O-ring
【
B
】
，
Add the recommended liquid as needed to
2
3
B
B
C
C
1
2
A
A
B
B
A
A
B
B
C
C