Segway SNARLER SGW570A6 2021 - Driven Pulley Assembly

CVT SYSTEM
CVT SYSTEM
3-6-19
◆
Check the guide Surfaces
【
D
】
of the Driven Pulley
Guide Seat
【
B
】
◆
If any of the guide Surfaces appear damaged,
replace the Driven Pulley Guide Seat.
Circlip
【
A
】
Dirven Pulley Guide Seat
【
B
】
Dirven Fixed Shaft
【
C
】
Driven Pulley Assembly
Driven Pulley Assembly
◆
Clean off any grease or dirt on the movable and
fi xed sheaves, and dry them with a clean cloth.
◆
Install :
1. Assemble the Dirven Pulley Guide Seat Assembly
【
E
】
.
2. Install the Spring
【
F
】
.
3. Install the Movable Sheave Assembly
【
G
】
.
Apply molybdenum disulfi de grease to the inner surfaces
【
H
】
of the bushings.
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H