CVT SYSTEM
3-6-15
Drive Pulley Assembly
◆
Clean off any grease or dirt on the movable and
fi xed sheaves, and dry them with a clean cloth.
◆
Install the One-Way Bearing.
1. Install the Cam Pin
【
A
】
and Cam Spring
【
N
】
together into the mounting hole of Drive Fixed Shaft.
2. Turn down along the axis and counterclockwise to
the end.
3. Check the One-Way Bearing (See One-Way Bearing
Inspection)
4. Install the Spring Seat
【
C
】
and Drive Pulley Spring
【
D
】
.
5. Install the Movable Sheave
【
E
】
and Counterweight
Shoes
【
F
】
.
B
A
D
C
E
F
To Next Page
Loading...
