Segway SNARLER SGW570A6 2021 - Tire Check

WHEELS AND TIRES
10 - 14
◆ Check whether the rim lines 【A】 on both sides
of the tire are parallel to the anti-slip rim/rim fl ange
【B】 and the surrounding relative clearance is
uniform.
◆ If the rim line and the rims/rim fl ange are not parallel
or the relative gap around the tire is uneven, bleed
the tire, re-lubricate the sealing surface, and then re-
infl ate the tire.
◆ Check whether there is air leak after the tire is in
place correctly.
◆ Apply soap solution to the tire rim, and check
whether there is air bubble.
◆ Bleed the tire to the specifi ed pressure.
◆ Check the tire pressure with the barometer.
Segway off ers tire pressure gauges and user kits.
。
Tire pressure (in cold state)
Front：48.3 kPa（0.49 kgf /cm
2
，7.0 psi）
Rear：48.3 kPa（0.49 kgf /cm
2
，7.0 psi）
◆ Wheel mounting (see Wheel mounting).
◆ Wipe the soap and water solution from the tire and
dry the tire before operation.
!
Do not operate the vehicle with soap and water around
the wheel rim.
It can cause tyre separation and can lead to dangerous
conditions.
Tire check
◆ Refer to the "Wheels/Tires" section of the Regular
Maintenance section.
B
A
B
A