ELECTRICAL SYSTEM
14 - 39
Rear guard for taillights (see chapter "Frame")
【A】buckle
【B】Tail lamp rear shield
【C】Tail lamp body
【D】Tail lamp bolt*3
【E】Tail lamp holder
【F】Tail lamp bulb
Replace
!
The lamps are divided into LED lamps and halogen lamps
(please confi rm according to the actual vehicle)
◆ The LED tail light source is damaged, only the tail
light assembly can be replaced
◆ If the light source of the halogen tail lamp is
damaged, the bulb of the same model can be
replaced
◆ Remove the buckle on the rear guard of the
headlight*4【A】
◆ Remove the taillight guard【B】
◆ Remove the tail lamp bolts and unplug the tail lamp
connector to remove the tail lamp body【C】
◆ If you replace the tail light bulb, please continue
to perform the following procedures:
◆ Rotate the tail lamp holder clockwise【E】]
◆ Remove the tail lamp holder【F】that needs to be
replaced, and replace with a new bulb.
The tail lamp bulb model is: P2/ 5W
The rear turning bulb number is: RY10W
Tail lamp
A
A
B
E
F
D
C
To Next Page
Loading...
