Segway SNARLER SGW570A6 2021 - Drive Belt; Drive Belt Inspection; Drive Belt Installation

CVT SYSTEM
CVT SYSTEM
3-6-10
Drive Belt
Removal
Removal
◆
Remove the drive pulley
【
A
】
(see Drive Pulley
Removal).
NOTE
NOTE
Before removing the drive belt, observe the direction
of the informations
【
A
】
(Such as manufacturers name
and arrow marks) printed on the belt so that it may be
reinstalled on the pulleys as originally.
◆
Lift the drive belt
【
B
】
off the driven pulley
【
C
】
.
Drive Belt Installation
Drive Belt Installation
NOTE
NOTE
Be sure the printed information faces the same direction
so the belt rotates in the same direction as originally
installed. When installing a new belt, install it so the
printed information
【
A
】
can be read from beside the
vehicle.
◆
Installation is basically the reverse of removal.
◆
Loop the belt
【
B
】
over the driven pulley
【
C
】
.
◆
Install the drive pulley (see Drive Pulley Installation).
◆
Put the transmission in neutral, and rotate the driven
pulley to allow the belt to return to the top
【
A
】
of
the sheaves, before measuring belt defl ection.
Drive Belt Inspection
Drive Belt Inspection
◆
Refer to the CVT System in the Periodic
Maintenance chapter.
B
B
C
C
A
A
Drive Belt