VEHICLE BODY AND FRAME
13 - 6
Front Shelf Cover
Put the vehicle on fl at ground fi rst
◆ Take out 8 pieces of front shelf cover fixing bolts
【A】;
◆ Remove the front shelf cover from the body;
Rear Shelf Cover
Put the vehicle on fl at ground fi rst
◆ After removing the left and right armrest fi xing bolts
【A】, remove the rear armrest 【B】;
◆ Take out the 8 bolts of the rear shelf cover 【C】,
and remove the rear shelf cover
Backrest removal
◆ Loosen the lock nut on the left side 【A】
◆ Pull out the cushion 【B】
Install the Backrest
◆ Align the two round holes and insert it in place;
◆ Tighten the lock nut 【A】;
A
B
B
A
C
B
A
To Next Page
Loading...
