sematic SDS - Contents

3
811-000-000 SDS© DC-PWM Compatible • Edition 25 March 2016
ENGLISH
www.sematic.com
Changes can be made without notice
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 What is the Sematic DC-PWM Drive System© Compatible? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Speed profile 10
3 General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Technical information 11
3.2 Sematic Drive System© Door Controller (DC-PWM) 11
4 Signals to/from the door controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.1 Sematic Drive System© (DC-PWM) COMPATIBLE connections 12
4.2 Sematic Drive System© set-up and incoming/outgoing signals from the door controller 13
4.3 Detector/Photocell/Barriers: Signal-Only Connection to the Door Controller (Direct Connection) 15
4.4 Detector/Photocell/Barriers: Complete Connection to the Door Controller 15
4.5 Magnetic Switches 17
5 Instruction without handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.1 Automatic Mode “AUTO” 18
5.2 Manual Mode “MAN” 18
5.3 Programming Mode “PROG” 19
6 Functions available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.1 Reversing system force setting 21
6.2 Reversing System choice: INTERNAL or EXTERNAL 21
6.3 Limited Door Reversal 21
6.4 Main Lift Controller Test 21
6.4.1 No MLC Signal 21
6.4.2 Main Lift Controller Input Alarm 21
6.5 Car Door Locking Device (USA = Restrictor) 21
6.6 Full or framed Glazed Paneled Doors 21
6.7 Aux Output Relay 22
6.7.1 Space Percentage 22
6.7.2 Gong While Opening 22
6.8 Forced Closing (Nudging) 22
6.9 Protective Device Logic Kn 22
6.10 Emulation Type 22
6.11 Alarms 23
7 Instruction with handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7.1 Handset (optional) 24
7.2 User Handset menus and submenus 25
7.3 Reversing System Force setting by means of the handset 26
7.4 Speed Profile and High Speed adjustments by means of the Handset 26
7.4.1 Option “Fast settings” 26
7.5 Option “Advanced Settings” 27
7.5.1 Option “Opening Parameters” 27
7.5.2 Option “Closing Parameters” 28
7.5.3 Option “Change Password” 28
7.5.4 Option “Reset speed” 28
7.5.5 Option “Input levels logic” 28
7.5.6 Option “Opening slow down delay to opening rest current” (Only for digidoor emulation) 29
7.5.7 Option “Closing limit delay to closing rest current” (Only for digidoor emulation) 29
7.6 Option “Reserved Area” 29
8 General option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8.1 Reversing System Setting by means of the Handset 30
8.2 Activation of the Main Lift Controller Test by means of the Handset 30
8.3 Activation of the Main Lift Failure by means of the Handset 30
8.4 Main Lift Controller Alarm - (MLC Input Alarm) 31
8.5 Limited door reversal Activation by means of the handset 31
8.6 Activation of the Car Door Locking Device setting by means of the Handset 31
8.7 Activation of the Glazed Paneled doors setting by means of the Handset 31
8.8 AUX Output Relay setting by means of the Handset 32
8.9 Protective Device Logic Kn setting by means of the Handset 32
8.10 Emulation Type 32