sematic SDS - Page 34

34
ENGLISH
www.sematic.com
Changes can be made without notice
Maintenance Menu - diagnostics and alarm management
811-000-000 SDS© DC-PWM Compatible • Edition 25 March 2016
If the option BATTERY is chosen, the display shows either battery voltage (in Volt) and status (in charge or in
use) or just “not present”. The following options are available:
• “BACK”: Press key F1 to restore the menu Maintenance
• “MENU”: Press key F3 to restore the Main Menu
If the option MAIN LIFT CONTROLLER MONITOR is chosen, the system IS BACK TO FOLLOW MAIN LIFT
CONTROLLER'S SIGNALS; the display shows a complete list of the input/output signals with their value.
When the input or output signal is activated the character on the display will change their graphic in white with
dark background.
The following options are available:
• “BACK”: Press key F1 to restore the menu MAINTENANCE
• “MENU”: Press key F3 to restore the MAIN MENU
If the option WARRANTY DATA is chosen, the display shows:
• warranty expiration date
• the activity hours left before warranty expiration
• the software version in use
• the motor code in use
The following options are available:
• “BACK”: Press key F1 to restore the menu MAINTENANCE
• “MENU”: Press key F3 to restore the MAIN MENU