sematic SDS - Page 40

40
ENGLISH
www.sematic.com
Changes can be made without notice
Upgrade from F28/F29 controller
811-000-000 SDS© DC-PWM Compatible • Edition 25 March 2016
MAGNETIC BISTABLE SWITCHES
FOR OPENING AND
CLOSING LIMITS
FUNCTION SEMATIC SDS Rel. 3
DC COMPATIBILE
16 IN La Opening limit switch input contact
(from the magnetic switch)
40
17 IN La Opening limit switch COM (from the
magnetic switch)
15
18 IN Lc Closing limit switch input contact
(from the magnetic switch)
39
19 IN La Closing limit switch COM (from the
magnetic switch)
15
Warning!
If in the old drive (F28/F29 C) the magnetic switches La-Opening Limit and Lc-Closing Limit are directly
connected to the main lift controller, disconnect and re-connect them at the new SDS Rel.3 DC
COMPATIBILE controller 39 - 15 - 40 - 15 input terminals (as shown in the table). Connect SDS Rel. 3 DC
COMPATIBILE La and Lc outputs to the main lidt controller, at terminals 16 - 17 - 18 - 19.