ENGLISH
www.sematic.com
Changes can be made without notice
Preface
7
811-000-000 SDS© DC-PWM Compatible • Edition 25 March 2016
1 PREFACE
This manual has been drafted taking into account that the Company installing genuine Sematic products will
comply with the following necessary requirements:
• personnel responsible for the installation and/or maintenance of the doors must be familiar with the General
and Specific regulations in force on the subjects of work safety and hygiene (89/391/CEE - 89/654/CEE - 89/
656/CEE);
• personnel responsible for the installation and/or maintenance must be familiar with the Sematic product and
must have been trained by Sematic or by an authorized Sematic agent;
• installation equipment used must be in good working order with all measuring instruments calibrated (89/655/
CEE).
Sematic:
• undertakes to update the present manual and send the customer copies of all new updates together with
material;
• within its continuous product improvement policy, reserves the right to make changes to the designs and
materials of its products. Sematic will give an agreed reasonable time to all its customers to allow them to
adapt to the new changes their complementary current constructions;
• guarantees a good performance only of the original parts sold directly and correctly installed.
Therefore:
parts manufactured and/or added to the Sematic product without having it checked by Sematic, or non-original
parts based upon a Sematic design (even if supplied by authorised agents) cannot be considered under guarantee
since the following conditions have not been ensured:
1. Quality control of raw material supply
2. Process control
3. Product control
4. Conformity tests according to Sematic specifications
Furthermore, Sematic
• guarantees the performance life of its products only if correctly stored (indoors storage at temperatures
ranging between -10 and +60 °C out of direct sunlight) and correctly installed;
• guarantees the perfect performance of the products installed in environments with temperatures between -10
and +60 °C and with a non-condensing, relative humidity level inbetween 20% and 80%. (Special note: for
temperatures and humidity rates outside these ranges, please consult our Technical Dept.)
The present document has been drafted in accordance with the following EU Directives:
• 98/37/CE Machinery Directive and subsequent modifications (when applicable)
• 95/16/CEE Lifts Directive
• 2014/33/EU Lifts Directive
• 93/68/CEE Markings
• 90/269/CEE Heavy loads handling
• Noise (Acoustic emission) 86/188/CEE modified according to Directive 98/24/CEE
• Electromagnetic compatibility 89/336/CEE
and with the following particular standards:
• EN81-1/2;
• EN81-20/50;
• AS17535;
• EN12015/EN12016;
• EN13015
Taking into account, during all project planning, the Risk Assessments relating to:
a. RISKS OF MECHANICAL HAZARDS
• Squeezing during operations
• Squeezing after Trapping caused by friction (glass panels)
• Cuts caused by sharp edges, or static sharp pieces
To Next Page
Loading...