15
Take 5 User’s Guide
Global Settings
28. Basic Program—Press write to load a basic, template program into
the edit buffer. Press the write button again to save it to memory. As a
shortcut, press the transpose down and latch buttons simultaneously.
29. Cal Wheels—Calibrates the Pitch and Mod wheels.
30. Cal Voices—Calibrates the voltage controlled oscillators and lters.
31. Reset Globals—Sets the global parameters to the factory default
settings.
32. Dump Preset—Transmits the current program in SysEx format via
the selected MIDI port. Dumped programs will load back into the same
location in memory when imported back into the synth via MIDI.
33. Dump Bank—Transmits the current bank in SysEx format via the
selected MIDI port. (See “MIDI SysEx Cable: on page 14.) Dumped
banks will load back into the same location in memory when imported
back into the synth via MIDI.
34. Dump All Banks—Transmits all User Banks in SysEx format via the
selected MIDI port. (See “MIDI SysEx Cable: on page 14.) Dumped
banks will load back into the same location in memory when imported
back into the synth via MIDI.
To Next Page
Loading...
