Picture: AC charging pile slow charging operation
process
1. Park the vehicle to the designated parking place of the AC
charging pile, and confirm that the vehicle is in P gear and the
parking brake is activated.
2. Unlock the charging port cover.
When the charging port cover is opened, the charging port
indicator will light up.
Illustration: Connect the charging cable
3. With the charging port cover open, press the button on the
connected charging gun and insert the charging gun according
to the corresponding charging port. After confirming that the
connection is correct and reliable, release the button on the
charging gun to complete the electronic lock closure.
• If the charging cable is dropped onto the
vehicle, the charging gun at the end of the
charging cable may damage the paint.
Illustration: Settings> Charging (Different configuration
functions are different, please refer to the actual car)
4. Tap t he b u tton t o sta r t c h a r g ing.
Illustration: Settings> Charging (Different configuration
functions are different, please refer to the actual car)
1. The battery is fully charged or the end charging
operation is performed on the touch screen.
2. Press the button on the charging gun, pull out the
charging gun and place it in the charging gun holder of
the slow charging pile.
3. Close the inner cover and outer cover of the slow
filling port.
1
2
3
4
5
6
7
8
9
10
11
To Next Page
Loading...