Picture: DC charging pile fast charging operation
process
1. Park the vehicle to the designated parking place of the AC
charging pile, and confirm that the vehicle is in P gear and the
parking brake is activated.
2. Unlock the charging port cover.
When the charging port cover is opened, the charging port indicator will
light up.
Illustration: Connect the charging cable
3. With the charging port cover open, press the button on the
connected charging gun and insert the charging gun according
to the corresponding charging port. After confirming that the
connection is correct and reliable, release the button on the
charging gun to complete the electronic lock closure.
• If the charging cable is dropped onto the
vehicle, the charging gun at the end of the
charging cable may damage the paint.
Illustration: Settings> Charging (Different
configuration functions are different, please refer to the
actual car)
4. After performing the charging operation on the screen of the
fast charging station, tap the button to start charging.
Illustration: Settings> Charging (Different configuration
functions are different, please refer to the actual car)
1. The battery is fully charged or the end charging operation is
performed on the touch screen.
2. Press the button on the charging gun, pull out the fast charging
gun and place it in the charging gun holder of the fast charging
pile.
3. Close the inner cover and outer cover of the fast charging port.
To Next Page
Loading...