Illustration：The foot movement detection sensor is
located under the bumper.
When you stand at the rear of the vehicle and are ready
to activate the foot movement detection sensor, please
make sure that you have carried the remote key with you
or placed it within the effective control range, and the
vehicle is not under high voltage.
● After activating the foot movement sensing
function, you can open / close the back door
without using your hands and kicking gently
towards the front of the vehicle under the rear
bumper. When you open / close the back door,
there is a beep alarm
●
When the back door is opened / closed to the
appropriate height, the light kick to the front of the
vehicle again will execute the stop action.
● If the electric back door encounters an obstacle
when it is closed, the back door will trigger anti
pinch and reverse 5 °, and give a buzzer alarm.
After removing the obstacle, please operate each
switch again to open and close the back door.
When cleaning the vehicle automatically,
please ensure that the remote key is not within
the control range. If the back door is opened
inadvertently, it may damage the back door.
If the foot movement detection sensor is blocked by
snow, ice, dirt, etc., the foot movement detection
function may not operate normally, so please keep the
sensor clean.
Illustration： Settings > Vehicle control （Different
configuration with different functions, please take the real
vehicle as the standard）
1
Click the button to
open or close Backdoor.
1
2
3
4
5
6
7
8
9
10
11
To Next Page
Loading...