If the electric Backdoor encounters an obstacle when it is
closed, the back door will trigger anti pinch and reverse 5
°, and give a buzzer alarm. After removing the obstacle,
please operate each switch again to open and close the
back door.
When opening or closing the electric backdoor, ensure
that there is no one nearby. When operating the electric
backdoor, do not hinder the action of the electric
backdoor in any way
1.
Open the electric backdoor and manually adjust the
height to the required position.
2. Press and hold the close button on the lower
edge of the electric backdoor for about 5S, and
the buzzer alarm sound will sound at the same
time. The opening angle has been set.
1. Open the electric backdoor and manually adjust
it to the maximum position angle.
2. Press and hold the close button on the lower
edge of the electric back door for about 5S, and
the buzzer alarm sound will sound at the same
time. The maximum opening angle has been set.
When opening or closing the electric back
door, please ensure that there is no one in the
opening or closing path of the electric back
door, otherwise personal injury may be
caused.
Do not use excessive force when opening or
closing the electric back door manually. Otherwise,
the electric back door may be damaged or function
abnormally.
If the vehicle battery is discharged or disconnected, be sure to
manually turn it on and off once for initialization.
To Next Page
Loading...