Energy recovery function: In the process of braking or
coasting, the kinetic energy generated by the vehicle can be
converted into electrical energy and stored in the power
battery to increase the vehicle's cruising range.
When the vehicle is moving and the driver's foot is off the
accelerator pedal, the activation of the energy recovery
function will reduce the speed and transfer the recovered
energy to the power battery.
The instantaneous power meter of the drive system on the
instrument displays the energy obtained through energy
recovery braking in real time.
The amount of energy recovered through the energy recovery
function depends on the current power state of the power
battery and the set energy recovery state.
3 Slightly higher than the normal energy
recovery intensity. When you release the
accelerator pedal, the energy recovery will be
performed at a slightly higher energy recovery
intensity. Therefore, the deceleration is greater and
the taxiing distance of the vehicle will be
significantly reduced
4 The strong energy recovery mode
can only be selected on extended-range models.
After setting, it will provide a significantly
higher energy recovery intensity when you
release the accelerator pedal. The vehicle
slows down very fast, thereby reducing your
use of the brake pedal. Frequency, and at the
same time add more energy to the power
battery.
Picture indication
: Settings> Driving (Different
configuration functions are different, please refer to the
actual car)
1 There is no energy recovery during
coasting. When you release the accelerator pedal,
the vehicle will coast freely.
2 Normal energy recovery intensity,
when you release the accelerator pedal, the energy
recovery will be performed at the normal energy
recovery intensity, so the deceleration is not large,
and the vehicle's sliding distance and free sliding are
slightly reduced.
1
2
3
4
5
6
7
8
9
10
11
Intelligent driving assistance 81
To Next Page
Loading...