Picture indication: shift knob
Depress the brake pedal to stop the car steadily. When the car is
at a standstill, press the P gear button to switch the gear to the P
gear to achieve parking.
The parking brake is only applied to the rear wheels and is
independent of the service brake system.
When the parking brake is working, the indicator light on the
meter will light up.
If an electrical fault occurs in the parking
brake, a parking brake fault message will be displayed
on the meter.
● The driver is not wearing a seat belt.
● The driver's door is open.
● The accelerator pedal is not depressed.
● The brake pedal is not stepped on.
● The vehicle speed is less than 3km/h.
● Close the main driving door.
● Depress the brake pedal.
● Switch to the "non-P gear" state.
Picture indication：Settings>ADAS assistance
(different configuration functions are different,
please refer to the actual vehicle)
1 EPB RELEASE
1. Switch to the parking gear.
2. Depress the brake pedal.
3. Click the button to turn the icon gray, and the parking state is
released.
4. The vehicle beeps and shifts to neutral (the parking brake is
released).
To Next Page
Loading...