Cutline: ACC Cruise control lever
ACC
● OFF: When ACC is on, it the control lever is
on OFF, then ACC the indicator light will be
closed.
● CANCEL When ACC is active, turn the cruise
lever to “CANCEL”, then ACC is cancelled, and
the system enters the cruise on (standby state), and
the cruise indicator on the dashboard turns gray.
● ON: When the system is off, it can be reactived if
the control lever is on ON gear, and the cruise
indicator light will turn grey.
● HEADWAY: Adjust the following distance between
vehicles.
● RES
•
After CANCEL, system will enter into
cruise on (active) state, turn lever to “RES ＋”,
speed will recover to the speed set before
CANCEL;
•
When ACC is on active state, turn cruise
lever to “RES ＋”, to increase speed.
● SET
•
When ACC is on standby state, turn the
cruise lever to “SET-”, ACC wil be active and
fix the current speed.
•
When ACC is on active state, turn cruise
lever to “SET －”, to decrease speed.
Cutline: ACC Speed adjustment
When ACC is active:
● Short press: “RES+” or ”SET-“, to set the speed
of cruise. Every press will increase or decrease
1km/h.
● Extended press: “RES+” or “SET-”, to set the
speed of cruise. Every press will increase or
decrease 5km/h.
To Next Page
Loading...