SEW-Eurodrive MOVI-C Series - Introduction; MOVI-C Controller Functionality

3
Introduction
General information
Manual – MOVI-C
®
CONTROLLER
10
3 Introduction
3.1 General information
3.1.1 Content of this manual
This manual describes:
• The installation of the MOVI‑C
®
CONTROLLER
• The interfaces of the MOVI‑C
®
CONTROLLER
• The interfaces and LEDs
• The engineering access to the MOVI‑C
®
CONTROLLER
• The configuration and startup of the MOVI‑C
®
CONTROLLER
Observe the following chapters when you install the OMW71B/72B Windows
®
memory
card:
• The installation the OMW71B/72B Windows
®
memory card
• The interfaces of the MOVI‑C
®
CONTROLLER used in connection with the OM-
W71B/72B Windows
®
memory card
• Connection examples for the Ethernet communication interface
• The first boot process of the OMW71B/72B Windows
®
memory card
3.1.2 Additional documentation
To be able to configure and startup the MOVI‑C
®
CONTROLLER simply and effect-
ively, you should also order the following publications in addition to this manual.
• "MOVI-C
®
CONTROLLER power UHX85A PROFIBUS DP-V1 fieldbus interface“
manual (in preparation)
• "MOVI-C
®
CONTROLLER power UHX85A PROFINET IO, EtherNet/IP™, Modbus
TCP/IP fieldbus interfaces“ manual (in preparation)
• MOVIDRIVE
®
modular product manual
• MOVIDRIVE
®
system product manual
When using the OMW71B/72B Windows
®
memory card:
• Observe the Microsoft documentation for configuration and operation of the
Windows
®
7 embedded operating system.
• Observe the "HMI Builder.PRO" manual (in preparation) for plant visualization
3.2 MOVI-C
®
CONTROLLER
MOVI-C®
CONTROLL
ER
3.2.1 Freely programmable MOVI-C
®
CONTROLLER
The MOVI‑C
®
 CONTROLLER can be programmed freely by using OMH85A type
CFast memory cards. It allows drive solutions, logic processes and sequence controls
to be automated simply and efficiently using IEC61131-3 compliant programming lan-
guages.
• The freely programmable MOVI‑C
®
 CONTROLLER is a universal solution be-
cause it is able to control the entire portfolio of SEW‑EURODRIVE inverters and
offers a simple upgrade to a more powerful controller due to universal execution of
the programs.
22781455/EN – 05/2016