SEW-Eurodrive MOVI-C Series - Automatic System Startup

5
Project planning and startup with Windows
®
7 Embedded
Application examples – operation of the Windows section
Manual – MOVI-C
®
CONTROLLER
40
5.9.4 Automatic system startup
After startup, you can configure the system to boot automatically and directly start with
a previously generated visualization.
Proceed as follows:
1. In the "Accessories" section in the Windows start menu, select "Run".
7845479051
2. The "Run" window opens. In the "Open" field, enter "control userpasswords2" and
click [OK].
7845484299
22781455/EN – 05/2016