SEW-Eurodrive MOVI-C Series - Description of Terminal Functions

4
Installation notes
MOVI-C® CONTROLLER power UHX85A / power eco UHX84A
Manual – MOVI-C
®
CONTROLLER
16
4.1.2 Description of terminal functions
LAN3 LAN4
USB1
USB2 USB3
X1
X2
On M
-24+
LAN1
USB7
USB6
LAN2
USB5
USB4
COM1
DVI-1
SLOT 1
SLOT 2
[2][1]
[3] [4] [3] [5][4]
[3] [4]
[6]
[7]
A
B
14344441483
No. Designation Terminal Function
[1] CFast card slot Slot 1 Card slot for CFast memory card OMH85A (con-
trol section with firmware, IEC program, user
data)
Slot 2 Card slot for Windows
®
CFast memory card OM-
W71B/72B (Windows
®
7 Embedded)
[2] Connector COM 1:
(D-sub connector, 9-pole)
COM 1 Reserved
[3] Connector LAN 1:
Ethernet interface connection (RJ45
socket)
LAN 1 Engineering interface for the Windows
®
section
(OMW71B/72B) of the MOVI‑C
®
CONTROLLER
Default IP address: 192.168.10.5
[3] Connector LAN 2:
Connection EtherCAT
®
/SBus
PLUS
in-
terface (RJ45 socket)
LAN 2 EtherCAT
®
/SBus
PLUS
interface
22781455/EN – 05/2016