Sharp AM-400

Using EXT. TEL Mode
97
4. Receiving
Faxes
Using EXT. TEL Mode
When the reception mode is set to EXT. TEL, you must answer all calls (even
faxes) by picking up an extension phone that is connected as explained on
page 17.
1 When the machine and extension phone ring, make sure that the date
and time display of fax mode appears (if needed press on the
machine) and then pick up the extension phone.
• Important! The machine must be in fax mode before you pick up the
extension phone, or fax reception will not be possible.
2 If you hear a fax tone, press on
the machine.
• If the other party first speaks with you
and then wants to send a fax, press
after speaking. (Press
before the sender presses their Start
key.)
3 Press to select RECEIVE. Replace the extension phone.
• RECEIVING will appear in the display and reception will begin.
FAX
MANUAL MODE
1:SEND, 2:RECEIVE