100
5. Special Fax Functions
Polling (Requesting a Fax Transmission)
Polling allows you to call another fax machine and have it send a document
(previously loaded in the machine’s feeder or stored in memory) to your
machine without assistance from the operator of the other machine.
Hint: Polling is useful when you want the receiving fax machine, not the
transmitting fax machine, to bear the cost of the call.
♦ To use the polling function, the other machine must be capable of being
polled.
♦ Before polling, make sure the other machine is set up to receive your
polling request.
1 Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2 Press .
3 Press .
4 Dial the number of the machine that you want to poll using one of the
following methods:
• Enter the full fax number and press .
• Press , enter a 2-digit Speed Dial number, and press .
• Press or until the name of the party appears in the display (or
the number if no name was stored), and press .
FAX
MENU
SPEED
Z
A
1:RECEPTION MODE
Display:
FAX SETTING
POLLING
ENTER STATION #
To Next Page
Loading...
Need help?
General
