67
3. Sending
Faxes
3. Sending Faxes
Sending a Fax
Follow the steps below to send a fax. To dial the fax number of the receiving
machine, you can either directly enter the number with the number keys
(Direct Keypad Dialling), or press and enter a two-digit Speed Dial
number (Speed Dialling).
♦ To use a Speed Dial number, you must first store the number in the
machine as explained on page 72.
♦ You can perform the following procedure even when the machine is already
busy sending or receiving a fax. In this case, the fax transmission will be
stored in the machine’s memory and performed once all previously stored
jobs have been completed.
SPEED
1 Make sure that the date and time
display of fax mode appears (if needed
press ).
FAX
10/03 11:37 FAX
Display:
∗∗ FAX ∗∗
Date and
time
Reception
mode
(page 95)
To Next Page
Loading...
Need help?
General
