Other Fax Transmission Settings
83
3. Sending
Faxes
Recall times for automatic redialling after a line error
occurs
You can select “0” or “1” for the number of automatic redialling attempts after a
line error occurs.
♦ The initial setting is “1”.
1 Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2 Press .
3 Press .
4 Press twice.
5 Press the numeric keys to enter the
desired number of recall attempts (0 or
1).
Example: 0 attempts
6 Press repeatedly to exit.
FAX
MENU
1: AUTO RECALL
Display:
FAX SETTING
1: RECALL [BUSY]
The display briefly shows
your selection, then:
1: RECALL INTERV.
6 Press the numeric keys to enter the
desired interval in minutes (any 2-digit
number from 01 to 15; 04 to 15 in
Poland).
Example: 1 minute
7 Press repeatedly to exit.
ENTER (0 - 1) 1
RECALL TIMES
The display briefly shows
your selection, then:
2: RECALL TIMES
To Next Page
Loading...
Need help?
General
