AR-5726/5731 SIMULATION 6 - 41
Operation/procedure
When the [START] key is pressed, the call signal from CI pin is
detected to deliver the call sound to the line and the speaker. The vol-
ume of call sound follows the soft SW.
Signal detection and delivery of pseudo-call sound at detection are
executed until the interruption command is provided by pressing the
[SYSTEM SETTINGS] key.
Note: Executable only when the FAX is installed.
Operation/procedure
Press [START] key.
The call sound of the machine and the pseudo-ring are generated.
66-41
Purpose Adjustment/Setting/Check
Function
(Purpose)
CI signal check
66-52
Purpose Operation test/check (Japan only)
Section FAX
Item Operation
Function
(Purpose)
Pseudo-ringer check
To Next Page
Loading...
