87
SCANNER FUNCTIONS
5
7
Click the "Preview" button.
The preview image will appear.
8
Specify the scanning area and set the
scan preferences.
For information on specifying the scan area and
setting the scan preferences, see scanner driver
Help.
"Scanner driver settings" (p.88)
9
When you are ready to begin
scanning, click the "Scanning"
button.
To cancel a scanning job after clicking the
"Scanning" button, press the [Esc] key on your
keyboard.
• If the angle of the image is not correct, reset
the original, and click the "Preview" button
again.
• If the preview image is not oriented
correctly, click the "Rotate" button in the
preview screen. This rotates the preview
image 90 degrees clockwise, allowing you
to correct the orientation without resetting
the original. "Preview screen" (p.89)
• If you set multiple pages in the RSPF, the
machine previews only the top page of the
originals, and then sends it to the original
exit area. Return the previewed original to
the RSPF before starting the scanning job.
Scanning a large area at high resolution
results in a large quantity of data and a
prolonged scanning time. It is recommended
that you set appropriate scanning preferences
for the type of original being scanned, i.e.,
Web page (monitor), Photo, FAX, or OCR.
Note
Caution
To Next Page
Loading...
Need help?
General
