88
SCANNER FUNCTIONS
Scanner driver settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the
"Preview screen", which shows the scanned image. For details on the scan settings, click the "Help" button in the
preview screen to display Help.
"Scanning Source" menu
Select the location where the original is placed.
Selections are "Platen" (document glass), "SPF
(Simplex)", "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)".
"SCANNING FROM A TWAIN-COMPLIANT
APPLICATION" (p.86)
Scan side menu
If you placed a two-sided original in the RSPF,
select "Left edge is fed first" or "Top edge is fed
first" from the scan side menu according to the
orientation of the placed original.
"Scanning Mode" menu
Select "Standard" or "Professional" (or "Custom
settings") for the scanning mode. For details on the
settings, click the "Help" button in the preview
screen to display Help.
"Zoom Preview" Checkbox
When this is selected, the selected part of the
preview image will be enlarged when the "Preview"
button is clicked. To return to the regular view,
remove the checkmark.
"Preview" button
Previews the document.
"Scanning" button
Click to scan an original using the selected
settings. Before clicking the "Scanning" button,
make sure the settings are correct.
"Close" button
Click to close the scanner driver setup screen.
"Zoom Preview" can be used when "Platen" is
selected in the "Scanning Source" menu.
2
3
Note
If "Preview" is cancelled by immediately
pressing the [Esc] key on your keyboard, or
the [CLEAR] key ( ) or [CLEAR ALL] key
( ) on the machine, nothing will appear in
the preview screen.
To cancel a scanning job after clicking the
"Scanning" button, press the [Esc] key on
your keyboard, or the [CLEAR] key ( ) or
[CLEAR ALL] key ( ) on the machine.
6
7
To Next Page
Loading...
Need help?
General
