Use the following procedure to specify SMTP authentication.
1. Start the Web browser, and access the printer by entering its IP address.
2. In the menu area, click [Network Settings].
The "Network Settings" page appears.
3. Click the [SMTP] tab.
4. Make the following settings:
• Authentication Method: Select [SMTP] or [POP before SMTP].
• User Name: Enter the user name for SMTP Authentication.
• Password: Enter the password set for the SMTP User Name.
• Device E-mail Address: Enter the e-mail address.
5. Enter the administrator password if required.
6. Click [OK].
7. Quit Web Image Monitor.
6. Monitoring and Configuring the Printer
108
To Next Page
Loading...
