Item Description
Gateway Enter the IPv4 address of the network gateway.
Configuring the IPv6 Settings
Click the [IPv6 Configuration] tab on the network settings page to configure the IPv6 settings.
IPv6
Item Description
IPv6 Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the printer is currently in use in an IPv6 environment.
In this case, use the control panel to disable [IPv6] under [Network Setting].
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
IPv6 Address
Item Description
DHCP Select whether or not the printer obtains its IPv6 address from a DHCP
server. To specify the printer's IPv6 address manually, select [Inactive] and
enter the printer's IPv6 address in [Manual Configuration Address].
IP Address (DHCP) Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
Stateless Address Displays up to four stateless auto addresses.
Gateway Address Displays the printer's default gateway address.
Configuring the Network Settings
87
To Next Page
Loading...
