Reading the Configuration Page
The configuration page contains the information shown below.
System Reference
• Machine ID
Shows the serial number assigned to the printer by the manufacturer.
• Total Memory
Shows the total amount of memory installed on the printer.
• Firmware Version
Shows the version of the printer's firmware.
• Printer Language
Shows the version number of the printer driver language.
• Attached Equipment
Shows the options attached to the printer.
• Toner Status
Shows the information about toner levels.
• Supplies Status
Shows the information about supply levels.
Paper Input
Shows settings made in the [Paper Input] menu. For details, see “Paper Input Menu”.
Maintenance
• Horizontal: Tray 2
• Vertical: Tray 2
• Vertical: Bypass Tray
System
Shows settings made in the [System] menu. For details, see “System Menu”.
Host Interface
Shows settings made in the [Host Interface] menu. For details, see “Host Interface Menu”.
PCL Menu
Shows settings made in the [PCL Menu]. For details, see “PCL Menu”.
PS Menu
Shows settings made in the [PS Menu]. For details, see “PS Menu”.
6. Monitoring and Configuring the Printer
110
To Next Page
Loading...
Need help?
General
