Sharp DX-C200P - PCL Menu; Changing the PCL Menu; PCL Menu Parameters

PCL Menu
You can set conditions when using PCL for printing.
Changing the PCL Menu
Use the following procedure to change the settings for orientation.
1. Press the [Menu] key.
CER408
The menu screen appears.
2. Press the [ ][ ] keys to select [PCL Menu], and then press the [OK] key.
3. Press the [ ][ ] keys to select [Orientation], and then press the [OK] key.
4. Press the [ ][ ] keys to select the orientation, and then press the [OK] key.
The selected orientation is displayed for two seconds with an asterisk, and then the [PCL Menu]
screen appears.
5. Press the [Menu] key to return to the initial screen.
PCL Menu Parameters
This section explains about parameters that can be set on the PCL Menu.
Orientation
Selects the page orientation.
Default: [Portrait]
• Portrait
• Landscape
Form Lines
Specifies the number of lines per page between 5 and 128.
PCL Menu
65