SMTP
Item Description
Primary SMTP Server Enter the IP address or host name of the SMTP server. Can contain up to 64
characters.
Port No. Enter the port number for SMTP (1 to 65535).
Authentication Method Select an authentication method from the following:
• [Anonymous]: The user name and password are not necessary.
• [SMTP]: The printer supports NTLM and LOGIN authentication.
• [POP before SMTP]: The POP3 server is used for authentication. When
sending e-mails to an SMTP server, you can enhance the SMTP server
security level by connecting to the POP server for authentication.
User Name Enter the user name for logging in to the SMTP server. Can contain up to 32
characters.
Password Enter the password for logging in to the SMTP server. Can contain up to 32
characters.
Device E-mail Address Enter the system administrator’s e-mail address.
This address is used as the sender's address of alert e-mail messages sent
from this printer. Can contain up to 64 characters.
Server Timeout
(seconds)
Enter the number of seconds the printer waits before considering an SMTP
operation to have timed out (1 to 999).
Configuring the POP3 Settings
Click the [POP3] tab on the network settings page to configure the POP3 settings.
Configuring the Network Settings
93
To Next Page
Loading...
Need help?
General
