Sharp DX-C200P - List;Test Print Menu; Printing the Configuration Page

List/Test Print Menu
You can print lists of configurations on printer or the paper printings.
Also, you can check the types and characters of all the printable fonts.
Printing the Configuration Page
Use the following procedure to print the configuration page.
• The configuration page is printed on A4 or Letter (8
1
/
2
" x 11 ") size paper from the priority tray.
Load this size of paper into the priority tray before printing the configuration page.
1. Press the [Menu] key.
CER408
The menu screen appears.
2. Press the [ ][ ] keys to select [List/Test Print], and then press the [OK] key.
3. Press the [ ][ ] keys to select [Config. Page], and then press the [OK] key.
The configuration page is printed. The [List/Test Print] screen appears on completion of printing.
4. Press the [Menu] key to return to the initial screen.
• If you start configuration page printing when appropriate paper is not loaded, an error message
appears. If this happens, load appropriate paper in a tray, and then perform a form feed, or
cancel the job.
• For details about the items displayed on the configuration page, see p.110 "Reading the
Configuration Page".
List/Test Print Menu
53