Using PostScript 3
Use the PostScript 3 driver to print files.
You can use the following functions if [Printer Features] is selected in the [Print] dialog:
Paper Type
Use this function to select the paper type.
In the [Feature Sets] list, select [Paper Type], and then, in the [Media Type] list, select the paper
type you want to use for printing.
Duplex
Use this function to print on both sides of sheets. In the drop-down menu, select [Layout], and then
specify the binding pattern in the [Two-Sided] area. Both short edge and long edge binding is
possible with this function.
Print Quality
Use this function to select the print quality.
In the [Feature Sets] list, select [Imaging], and then, in the [Print Quality] list, select the print quality.
You can select [Standard], [High Quality], or [Best Quality].
Color Profile
Use this function to select the color profile pattern.
In the [Feature Sets] list, select [Imaging], and then, in the [Color Profile] list, select the color profile
pattern.
You can select [Off], [Presentation], [Solid Color], or [Photographic].
CMYK Simulation Profile
Use this function to simulate the color tone of the printing ink.
In the [Feature Sets] list, select [Imaging], and then, in the [CMYK Simulation Profile] list, select the
printing ink standard.
You can select the printing ink standard from [Off], [US OffsetPrint], [Euroscale], or [PaletteColor].
Black Over Print
Use this function to specify whether or not to print black over other colors.
To enable black text over print, in the [Feature Sets] list, select [Imaging]. Then, set [Black Over
Print] to [On].
Dithering
Use this function to specify the rendering mode.
In the [Feature Sets] list, select [Dithering], and then, in the [Dithering] list, select the rendering
mode.
You can select [Automatic], [Photographic], or [Text].
Using PostScript 3
123
To Next Page
Loading...
Need help?
General
