Configuring the Network Settings
Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [IPv6 Configuration], [Network Application],
[DNS], [Auto E-mail Notification], [SNMP], [SMTP], and [POP3].
Checking the Network Status
Click the [Network Status] tab on the network settings page to display network information.
General Status
Item Description
Ethernet Speed Shows the type and speed of the network connection.
IPP Printer Name Shows the name used to identify the printer on the network.
Network Version Shows the version of the printer's network module (a part of the printer
firmware).
MAC Address Shows the MAC address of the printer.
TCP/IP Status
Item Description
DHCP Select whether the printer should receive a dynamic IPv4 address
automatically using DHCP. To use DHCP, select [Active]. When enabled,
the items below cannot be configured.
IP Address Enter the IPv4 address for the printer.
Subnet Mask Enter the subnet mask of the network.
6. Monitoring and Configuring the Printer
86
To Next Page
Loading...
