Sharp DX-C200P Software Guide

• The "option” specified in a command is an intrinsic printer option and its syntax is similar to printing
from UNIX.
lpr
When specifying a printer by an IP address
c:\> lpr -Sprinter's IP address -Pprinter name [-ol] \pass name\file name
When specifying a printer by host name instead of an IP address
c:\> lpr -Sprinter host name -Pprinter's name [-ol] \pass name\file name
To print a binary file, include the “-ol” switch (a dash followed by a lowercase O and L) after the
printer name.
ftp
Use the “put” or “mput” command according to the number of files to be printed.
When one file is printed
ftp> put \pass name\file name [option]
When multiple files are printed
ftp> mput \pass name\file name [\pass name\file name...] [option]
1. Formulate the printer's IP address or the host name of the hosts file printer as an argument
and use the “ftp” command.
% ftp printer's IP address
2. Enter the user name and password, and then press the [OK] key.
User: sysadm
Password: sysadm
3. When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
4. Specify files to be printed.
The following shows the examples of printing a PostScript file named "file 1” in the "C:\PRINT”
directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
ftp> mput C:\PRINT\file1 C:\PRINT\file2
Printing Files Directly from Windows
117

Sharp DX-C200P Specifications

General

Brand	Sharp
Model	DX-C200P
Category	Printer
Language	English